9
Figure 9. Inserting the RAID Box
Loading the Drive into the Carrier
The
SATA RAID 5/0 Bay Enclosure
should be fitted with
three hard drives. Insert each drive into the drive carrier
as follows.
1.
Unlock the drive carrier and slide it out of the
enclosure.
2.
Place the disk drive into the drive carrier, so that the
SATA connector is lined up with the connector
inside the drive carrier.
3.
Carefully push the disk drive so that the drive’s
SATA connector is seated securely into the SATA
connector in the drive carrier.
4.
Secure the disk drive by screwing it to the drive
carrier case.
5.
Slide the loaded disk drive carrier into the
SATA
RAID 5/0 Bay Enclosure
but
do not lock it
. See
Initializing RAID Array
on page 11 for more
information.
Summary of Contents for SC-000081-S1
Page 18: ...18 Blank Page...
