5
Figure 6. Rear View
The
power connector
supplies power to the RAID box.
Connect both power connectors on the RAID box using
the provided "Y" split power cable.
The
3-pin RS232 serial cable
is used for remote monitoring
of SIIG RAID box. The RS232 port is configured with DTE
and PC compatible pin assignments.
There is a
triangular symbol
on both
3-/9-pin serial
cable
connector and 3-pin RS232 connector on the RAID box,
please make sure you connect in the right direction (both
triangle symbols match each other). Connecting in wrong
direction will not damage RAID controller, however the
terminal or GUI will not work.
The
cooling fan
inside the RAID box provides air
circulation for the disk drives.
Cooling fan vent
Power
connectors
RAID level
configuration
jumper pins
To lock each carrier, insert the key, shown on
Figure 11.
Turn it in a clockwise direction. To unlock a carrier, turn
the key in a counterclockwise direction.
SATA interface connector
3-pin RS232 connector
(Terminal Port)
Summary of Contents for SC-000081-S1
Page 18: ...18 Blank Page...
