SIIG SC-000081-S1, Quick Installation Manual

Page: 15 / 20

15
Config Setup
Configures email alert so that in the event of a RAID
failure, the RAID administrator will be notified
immediately.
1.
Right click the SIIGView Server icon that appears
on the taskbar by the system clock.
2. Click Config Setup .
3. Enter the following information:
Mail Server : Enter the IP address of the mail server
on your network. If no mail server information is
added, the mail alert function will be disabled.
IP Address : Enter the IP address of the mail server
on your network. The entries in the top two boxes
should be identical.
Administrator's Email : Enter the email address for
one or two administrators.
Delay Time (Minute) : Alert emails will continue to
be sent until the problem is resolved. The email
events are fan fail, disk status (off line, fails,
rebuilding) and RAID fails. Enter the desired time
lapse between successive emails (Default = 1 minute)
4. Click Save to save your changes.
SIIGView Monitor
The very first time running
SIIGView Monitor , Java
Runtime will install. Follow the directions to install the
software.
1.
Select I accept the terms ... , click Next .
2. Select Typical , click Next .
3. Click Finish to complete the installation. The
SIIGView browser window will automatically open.