6
6.
At
Select the driver to be installed
, click
Next
.
7.
Follow on-screen instructions to complete the
installation.
Existing Windows Vista (64-bit) Installation
1.
Install the board and boot up Windows.
2.
At
Found New Hardware
, insert the driver CD,
select
Locate and install driver software
(Recommended)
, then click
Continue
.
3.
Click
Next
, then
Close
.
4.
Remove the driver CD and restart Windows to
complete the installation.
Windows XP (32-bit) / Server 2003 (32-bit)
New Windows XP (32-bit) / 2003 (32-bit) Installation
A new installation of Windows XP / Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the
contents
of the
Floppy
folder,
found on the driver CD, onto a blank floppy disk then
follow the directions below.
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2.
At the
Windows Setup
screen, press
F6
to install the
SATA II PCIe Pro
driver.
3.
Insert the driver floppy disk you made above. Press
S
, then press
Enter
.
4.
Select
Silicon Image SiI 3132 ... Controller for
Windows XP and Server 2003
and press
Enter
.
5.
Press
Enter
to continue and follow the on-screen
instructions to complete Windows installation.
Summary of Contents for eSATA II PCIe Pro
Page 13: ...13 Blank Page...
Page 14: ...14 Blank Page...
