SIIG eSATA II PCIe Pro, Quick Installation Manual

Page: 4 / 16

4
Windows 7 (64-bit)
New Windows 7 (64-bit) Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows? , click
Load Driver .
3. Insert driver CD, click Browse . Close the AutoPlay
box if prompted.
4. Double click CD Drive ... Driver .
5. Double click Win7 , double click 64bit
For non-Itanium processors: Select AMD64 , then
click OK .
For Itanium processors: Select IA64 , then click OK .
6. At Select the driver to be installed , click Next .
7. At Where do you want to install Windows? , re-
insert your Windows installation disk.
8. Wait several seconds, then follow the on-screen
instructions to complete Windows installation.
Existing Windows 7 (64-bit) Installation
1. Install the board and boot up Windows.
2. At the Windows desktop, insert the driver CD.
Close the AutoPlay box if prompted.
3. Right click Computer , click Manage , then click
Device Manager .
4. Right click Serial ATA Controller , click Update
Driver Software .
5. Click Browse my computer for driver software .
6. Type D:\ , click Next . (Change D: to match your
CD/DVD-ROM drive letter)
7. Click Close to complete the installation.