2
HDD Activity
LEDs
eSATA
connectors
Board Layout
Figure 1. eSATA II PCIe Pro Layout
Hardware Installation
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer.
2.
Unplug the power cord and remove the cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
Carefully align the card to the selected PCIe slot
push the board down firmly, but gently, until it is
well seated.
5.
Replace the slot bracket holding screw to secure the
card. Replace the computer cover and reconnect the
power cord.
HDD LED pins (Front
chassis LED; connects
horizontally)
Summary of Contents for eSATA II PCIe Pro
Page 13: ...13 Blank Page...
Page 14: ...14 Blank Page...
