SIIG eSATA II PCIe Pro, Quick Installation Manual

Page: 12 / 16

12
Mac OS Driver Installation
This section provides information on how to install the
eSATA II PCIe Pro drivers.
1. Install the eSATA II PCIe Pro and boot up your
system. Insert the driver CD.
2. At the desktop double click Drivers icon.
3. Double click Mac folder.
4. Double click Sil3132_1.1.9u_S.1_Pkg.pkg .
5. Click Continue , Continue , Continue, then Agree .
6. In OS 10.5 , click Change Install Location . If not,
please continue with step #7.
7. Select destination drive, then click Continue, then
click Install .
8. At Authenticate enter your password, then click
OK .
9. Click Close and restart system to complete the
installation.
To Verify Mac Installation
1. At the desktop, click Go, then click Utilities .
2. Double click System Profiler .
3. Click PCI Cards .
4. A pci1095, 3132 should be displayed.
Hot-Plugging Hard Disk Drives
To remove a drive from a powered up system, do the
following.
1.
Click and drag the disk icon into the Trash can .
2. When the icon does not appear on the desktop, you
can unplug the disk drive.