(1) When mounting with screws
Tapping
screw
With
the
φ
2.2 mm holes at the corners of
the printer as a reference for positioning,
fix the printer on the printer base by
tightening the tapping screws from the
top of the printer (see Figure 8-5).
φ
2 mm
Printer mounting base
(2) When mounting without screws
With
the
φ
2.2 mm holes as a reference
for positioning, fix the printer by
pressing the eaves on both sides of the
upper portion of the printer.
Figure 8-5 Mounting with Screws
(MTP201 and 401 Printer)
Figure 8-6 Mounting without Screws
(MTP201 and 401 Printer)
8-3
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from