Instruction Manual OilGuard Ex M
14
10241E/2
Action Remarks
2.
Place the wire coming from the
fine-wire fuse (A) onto the
appropriate terminal (100 V, 115 V
or 130 V).
By default the wire is on the
115 V terminal.
On the terminal strip you can fine tune with 110 V, 115 V or 130 V.
3.2.5
Connecting the data lines
For information about control signals, please refer to Section 2 in the
Reference Handbook.
Figure 7: Position of the connection terminals
Figure 8: Terminal strip
For controlling the "Automatic Stopping Device" in compliance with IMO
Resolution MEPC.107 (49) and 46CFR162.050, relay output 1 must be used.
The relay output 2 is only for outputting additional information.
Position of the
connection terminals
for data lines
Terminal
designations
