Instruction Manual OilGuard Ex M
10241E/2
9
Action
3.
Fit the lock nut (C) over the inlet tube
and turn clockwise to fix in place
(bayonet connector).
4.
Connect the inlet tube to the sample
supply and the discharge to the sample
return line.
The discharge must be pressureless
(do not use siphon or similar
components)!
3.1.3
Installation of cooling element
Action
1.
Position the cooling element on the pins for
that purpose on the rear side of the
photometer and fasten it with four nuts.
The cooling water connections must be
above and below!
The photometer is then mounted on the
installation point using the four supplied
spacer bolts.
Optional cooling
element
