USER MANUAL
Cutter operating instructions
19
5.3.7.4 Cutting speed
Press
“
+
”
or
“
-
”
to adjust the cutting speed. High speed is suitable for cutting large characters
or images. Low speed is preferable for cutting small characters as this increases accuracy. Speeds
in shifts of 10 are:
10
→
20
→
30
→
40
→
50
→
60
→
70
→
80
¾
When cutting at high speeds, curves may become zigzagged. To eliminate the problem, lower the
cutting speed.
5.3.7.5 Interface for setting X-axis, Y-axis
To minimize the error in mechanic size, set the
“
X, Y
”
ratio to be adjustable, and set the
composing size conformed to the plotting size.
