3.2
Installation of blade
WARNING! Improper operation may result in personal injury or
damage of equipment.
Do not touch the blade tip with your
finger to prevent injury or damage to
blade head.
3.2.1 Fit cutter into the rotary tool, as shown in the following illustrations:
(outside view) (enlarged view)
3.2.2 Adjust the length of the blade as required for specific media.
Blade length screw
Blade handle Blade
Blade holder
Basic operation
USER MANUAL
6
Vinyl
surface
Base paper
Correct blade length Blade depth too long Blade depth too short
3.2.3 (1) Loosen the screw on the blade handle.
(2) Assemble the tool with blade into the tool
carrier.
(3) When the tool is in the appropriate position gently
tighten the blade holder screw.
