User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
12
2.3 Blade Installation
1: Install Blade. (Figure 2-6)
2:
Push the blade to the bottom of the blade holder. (Figure 2-7)
3. Adjust the blade tip to suitable length by rotating “Blade depth adjustment screw” clockwise or
counterclockwise. (Figure 2-8)
Figure 2-6
Figure 2-7
Figure 2-8
Tips:
“
The proper length” means the
blade length is about 0.1mm more
than film’s thickness. For example,
if the thickness of film is 0.5mm,
then the blade length is properly
adjusted to 0.6mm and it can
completely cut through the film
layer without cutting though the
paper backing.
