Signet 8900 Manual Download Page 11

Page: 11 / 52

Signet 8900 Multi-Parameter

5.2 Mounting

Accessories

Mfr. Part No.

Description

3-8050.395

Splashproof rear cover

•

Use in conjunction with liquid tight connector kits to seal wiring
ports.

•

Protects rear of instrument and terminals from moisture intrusion
and corrosion.

•

Suitable for indoor and outdoor installations.

•

3-9000.392 Liquid tight connector kit, NPT (3 connectors)

•

3-9000.392-1 Liquid tight connector kit, NPT (1 connector)

•

3-9000.392-2 Liquid tight connector kit, PG13.5 (1 connector)

Mfr. Part No.

Description

3-0000.596-1

¼-DIN wall mount bracket, 6.5 in. depth

•

Use to mount the 8900 (without a splashproof rear cover) to a solid wall or bulkhead.

•

Powder coated aluminum, black, 3.2 mm (0.125 in.) thick

3-0000.596-2

¼-DIN wall mount bracket, 9.0 in. depth

•

Use to mount the 8900 (with a Splashproof rear cover) to a solid wall or bulkhead.

•

Powder coated aluminum, black, 3.2 mm (0.125 in.) thick

Mfr. Part No.

Description

3-5000.598

Shelf/pipe mount bracket, ¼-DIN instrument

•

Use for surface mount installations under a shelf, or on a counter or rack.

•

Powder coated aluminum, black, 3.2 mm (0.125 in.) thick

•

Nylon straps or other suitable fasteners may be used to secure this
bracket to a pipe.

Mfr. Part No.

Description

3-8050.392

Panel adapter, ½-DIN to ¼-DIN

•

Converts existing panel cutouts, up to 96 x 192 mm (3.8 x 7.6 in.), to ¼-DIN (92 x 92 mm)

•

Powder coated aluminum, black, 3.2 mm (0.125 in.) thick

•

Neoprene gasket and machine screw hardware included

Mfr. Part No.

Description

3-5000.399

Panel adapter, 5 x 5 in. to ¼-DIN

•

Converts 127 x 127 mm (5 x 5 in.) panel cutouts to ¼-DIN

•

Primarily used when replacing retired 500-series

Signet instruments with modern ¼-DIN instruments

•

Injection molded black plastic (Acetal)

•

Neoprene gasket and machine screw hardware included

1/2" NPT

Summary of Contents for 8900





















































Search results

Summary of Contents for 8900

Reviews:

Related manuals for 8900

Brands by name

Popular brands

Signet 8900, Manual

Search results

Summary of Contents for 8900

Reviews:

Related manuals for 8900

Brands by name

Popular brands