Installation and Programming Guide
For EZ Indoor Models:
• 8124US
• 8124IT
• 8124FR
• 8124PT
• 8124ES
• 8124AU
• 8126US
• 8126IT
• 8126FR
• 8126PT
• 8126ES
SIGNATURE CONTROL SYSTEMS, INC LIMITED WARRANTY AND DISCLAIMER: TURF PRODUCTS
1) Signature Control Systems, Inc. [“SCS”] warrants to the owner (the “Buyer”) that all new products, as featured in the current Signa-
ture Turf Catalog at date of purchase will be free from original defects in materials and workmanship for the time periods described below,
provided they are used for approved purposes under manufacturer’s recommended specifications.
2) This warranty is given expressly and in place of all other expressed or implied warranties of merchantability and fitness for a particular
purpose.This is the only warranty made by Signature Control Systems, Inc for Turf products. This warranty gives you specific legal rights
and you may have other rights which vary from state to state.
3) During the warranty period, SCS will repair or replace, at SCS’s sole discretion, any part to be found defective with prior written autho-
rization. Buyers remedy is limited solely to the replacement or repair of the defective parts.
4) This warranty does not apply (i) to Acts of God including without limitation, lightning and flooding; or (ii) to products not manufactured
by SCS when used in conjunction with SCS products; or (iii) where equipment is used, or installation is performed in any manner contrary
to SCS’s specifications and instructions, nor where equipment is altered or modified.
5) Signature Control Systems, Inc. reserves the right to redesign, alter or modify its products at anytime and does not, and will not,
assume any liability with respect to obsolete inventory arising there from.
6) Neither SCS or its affiliates are liable for any indirect, incidental or consequential damages in connection with the use of equipment, in
-
cluding but not limited to: vegetation loss, the cost of substitute equipment or services required during periods of malfunction or resulting
non-use, property damage or personal injury resulting from installer’s actions, whether negligent or otherwise.
7) No agent or representative of SCS, nor of any distributor, retailer, lessor or installer of the system, has any express or implied authority
to make any representation, promise, guarantee or warranty not stated here. SCS disclaims any warranty of merchantability or fitness for
a particular purpose, or any other warranties that extend beyond those described here.
8) Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. All
implied warranties, including those of merchantability and fitness for use, are limited to the duration of this express warranty.
9) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
10) STANDARD PRODUCTS LIMITED 1-YEAR WARRANTY: All SCS products are covered by this warranty for a period of one year from the
dateof supply except as noted below:
a) Signature Turf Gear Drive Rotors, Spray-Heads & Valves: Five (5) years; from original sale date.
b) Signature Turf & Satellite Controllers: Two (2) years; from original sale date.
c) Repairs & Refurbished Components: Balance of product warranty or three (3) months, from repair date, whichever occurs first, on
materials and labor only.
d) Brass Quick Coupler Valve Bodies: Five (5) years; from original sale date.
e) Solenoid Coils: One (1) year; from original sale date.
11) TECHNICAL ADVICE: SCS warranties as hereinabove set forth shall not be enlarged, diminished or affected by, and no obligation or
liability shall arise or grow out of, SCS rendering of technical advice or service in connection with Buyer’s order or the products furnished.
12) QUESTIONS: If you have any questions concerning the warranty or its application, please email your question to [email protected]
or write to:
Signature Control Systems, Inc
Turf Division
8800 N. Allen Rd.
Peoria, Illinois 61615
U.S.A.
Attention: Customer Service.
13) CLAIMED DEFECTIVE MERCHANDISE POLICY. Products returned to the retailer or distributor and claimed defective must be inspected
by an authorized SCS representative to determine warranty compliance. If approval is granted, products will be repaired or replaced, or a
credit memorandum covering the net purchase price will be issued.
14) In the event of a defect: If a defect arises in a Signature product or part within the warranty period, you should contact your Signa-
ture retailer, distributor, or Signature Control Systems, Inc. at www.signaturecontrolsystems.com or one of the following locations:
WORLD
HEADQUARTERS
16485 Laguna Canyon Rd.,
Suite 130,
Irvine • California • 92618
Tel: 949.580.3640
Fax: 949.580.3645
MANUFACTURING
FACILITY
8800 N. Allen Rd.,
Peoria
Illinois • 61615
Tel: 949.580.3640
Fax: 949.580.3645
EUROPE & MIDDLE EAST
5 rue de la Vallee Yart
78640 Saint Germain de
la Grange
France
Tel: +33.13.489.9056
Fax: +33.13.489.6025
REGIONAL OFFICES
ASIA
Shenzhen • Guangdon Province • 518131
Tel: (86) 136.00419465 • Fax: (86) 755.83275012
SOUTH AMERICA
Roodepoort • South Africa
Office & Mobile: +27 82 553 9093 • Fax: 086 670 6318
AUSTRALIA
Glen Osmond 5064 • South Australia
Tel: +61 (0) 417 862 269 • Fax +61 (0) 8 8338 2021
MEXICO, CENTRAL AMERICA
5
Guanajuato • Mexico
Tel/Fax: +52 (461) 614.2322
SOUTH AMERICA
Santiago • Chile
Tel/Fax: +56 229.556220
U S A T o l l F r e e : 8 8 8 . 6 3 5 . 7 6 6 8
15) SERVICE TIME-LINE:
Signature may, at its option, require that product or part be returned to a Signature service point or your
retailer or distributor. Signature will determine whether the claimed defect is covered by the warranty. If covered, the product will be
repaired or replaced. Please allow 4 to 6 weeks for completion of repairs or replacement and return of the product or part. If a product or
part is replaced, the replacement is warranted only for the remainder of the original product or part warranty period.
FCC RULES
This electronic irrigation controller generates and uses r
adio frequency energy and
if not installed and used properly, that is, in strict accordance with the manufacturer
’s
instructions, may cause interference to r
adio and television reception. It has
been type tested and found to comply with the limits for a Class B computing
device in accordance with the specifications in Subpart J of Part 15 of FCC R
ules,
which are designed to provide reasonable protection against such interference in a
residential installation. However
, there is no guarantee that interference will not
occur in a particular installation. If this controller does cause interference to radio
or television reception, which can be determined by turning the controller off and
on, the user is encouraged to try to correct the interference b
y one or more of the
following measures:
Reorient the receiving antenna
Relocate the controller with respect to the receiv
er
Move the controller a
way from the receiv
er
Plug the controller into a different outlet so that the controller and receiver are
on different branch circuits
If necessary, the user should consult the dealer or an experienced r
adio/television
technician for additional suggestions. The user may find the following booklet
prepared by the F
ederal Communications Commission helpful:
“How to Identify and R
esolve R
adio-TV Interference Problems”
This booklet is available from the U
.S. Go
vernment Printing Office, W
ashington,
DC 20402. Stock No. 004-000-00345-4.
CANADIAN RADIO INTERFERENCE REGULATIONS
NOTE: This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the radio
interference regulations of the Canadian Department of
Communications.
If you ha
ve questions, problems or comments on y
our new
EZ Indoor 8100 Series, please call our Technical Services
Department toll-free at 1-866-4SIGNATURE, or b
y visiting us
on our website at
www.SignatureControlSystems.com
NOTE: In our efforts to continually improve and update
our products, features and specifications in this manual
may change without notice.
8800 N. Allen Rd.
Peoria, IL 61615
©2014 Signature Control Systems, Inc.
www.SIgnatureControlS
ystems.com
99954664
Summary of Contents for EZ Indoor 8124US
Page 7: ......
