Signamax
FO-065-7732A Manageable Gigabit Switch
User’s Manual 87
SNMP
To view and/or change all SNMP-related information, click the
Advanced Setup
button, and click
SNMP
in the selection menu.
The
SNMP Configurations
window appears. As shown below, the
factory-default
SNMP
value is
Enabled
and the factory-default
Community Name
value is
public
.
SNMP
Step 1: Specify whether it is Disabled or Enabled by clicking the drop-
down list.
Get Community Name
Step 2: Click in the text box and type a get community name.
Set Community Name
Step 3: Click in the text box and type a set community name.
Trap Community Name
Step 4: Click in the text box and type a trap community name.
Trap Host IP Address
Step 5: Click in the text box and type a IP address for trap host 1~4.
Cold Start Trap
Step 6: Specify w hether it is Disabled or Enabled by clicking the drop-
down list.
Warm Start Trap
Step 7: Specify whether it is Disabled or Enabled by clicking the drop-
down list.
Link Down Trap
Step 8: Specify whether it is Disabled or Enabled by clicking the drop-
dow n list.
Link Up Trap
Step 9: Specify whether it is Disabled or Enabled by clicking the drop-
down list.
Authentication Failure Trap
Step 10: Specify whether it is Disabled or Enabled by clicking the drop-
down list.
Rising Alarm Trap
Step 11: Specify whether it is Disabled or Enabled by clicking the drop-
down list.