Signamax
FO-065-7732A Manageable Gigabit Switch
User’s Manual 71
PORT SETTING
Step 1: Click
Basic Setup
_
LAN Port
_
Port Setting
to show the
configuration for all ports.
Step 2: In the
Port
column, click the port you want to configure.
Admin Setting
Step 3: Click the drop-down menu under
Admin Setting
, decide to
disable or enable it.
<Note>
Disable: places the port in DOWN state. In this state, packets cannot
be switched to and from the port
Enable: places the port in UP state. In this state, packets can be
switched to and from the port.
Speed/Duplex Options
Step 4: Click the drop-down menu under
Speed/Duplex Options
if you
want to change the line speed and duplex settings.
<Note>
Auto: allows the switch to automatically ascertain the line speed and
duplex mode.
All the other selections force the port to use a specific line speed and
duplex mode.
‘HD’ denotes half-duplex mode; FD denotes full-duplex mode.
Flow Control Options
Step 5: Click the drop-down menu under
Flow Control Options
if you
want to configure (Auto/Disable/Enable) the flow control for this
port.
<Note>
Auto: allows the switch to automatically ascertain whether or not to
use flow control.
Enable: turns on flow control at all times.
Disable: turns off flow control at all times.
Step 6: Click
Update Setting
when completed. A confirmation window
appears.
<Note>
The information here displayed automatically updates every 15
seconds, without requiring you to refresh the window.