Signamax
FO-065-7732A Manageable Gigabit Switch
26 User’s Manual
SLIP
Step 6: Move to highlight
SLIP
and press <Enter> if you want to change it,
Disabled or Enabled.
<Note>
If you enable SLIP, a message tells you that the console port
becomes accessible only through the SLIP protocol after you logout
from the current console screen.
SLIP Address
Step 7: Move to highlight
SLIP Address
and press <Enter> if you want to
set it.
SLIP Subnet Mask
Step 8:
When SLIP IP address is entered, move to highlight
SLIP Subnet
Mask
and press <Enter>. Enter a suitable subnet mask.
<Note>
You must enter a SLIP address before you can enter a SLIP subnet
mask.
Return to Basic Management
Step 9: Press <Esc> to return to [Basic Management] screen when
completed.