SIGMAKOKI OptoSigma HSC-103, User Manual

Page: 20 / 48

SC12205-K10-15002A 2nd
20
Copyright 2020, SIGMAKOKI Co.,Ltd.
3-2-4 Sensor
No Memory Switch contents Setting Range / Select items Default Value
1 LS LVL1 NM OPEN/NM CLOSE NM CLOSE
2 LS LVL2 NM OPEN/NM CLOSE NM CLOSE
3 LS LVL3 NM OPEN/NM CLOSE NM CLOSE
4 OS LVL1 NM OPEN/NM CLOSE NM OPEN
5 OS LVL2 NM OPEN/NM CLOSE NM OPEN
6 OS LVL3 NM OPEN/NM CLOSE NM OPEN
7 NS LVL1 NM OPEN/NM CLOSE NM OPEN
8 NS LVL2 NM OPEN/NM CLOSE NM OPEN
9 NS LVL3 NM OPEN/NM CLOSE NM OPEN
1
～
3) LS LVL 1
～
3: Limit sensor input logoc level setting (1
～
3axis)
Select limit sensor detecting level (Input logic level) for each axis
[Select item] NM Open
：
(Normally switch ON by detecting limit sensor from SW OFF condition)
NM Close
：
(Normally switch OFF by detecting limit sensor from SW ON condition)
4
～
6) OS LVL 1
～
3: ORG sensor input logic level setting (1
～
3axis)
Select ORG sensor detecting level (Input logic level) for each axis.
[Select item] NM Open
：
(Normally switch ON by detecting ORG sensor from OFF condition)
NM Close
：
(Normally switch OFF by detecting ORG sensor from ON condition)
7
～
9) NS LVL 1
～
3: NEAR ORG sensor input logic level setting (1
～
3axis)
Select NEAR ORG sensor detecting level (Input logic level) for each axis
[Select item] NM Open
：
(Normally switch ON by detecting NEAR ORG sensor from OFF condition)
NM Close
：
(
Normally switch OFF by detecting NEAR ORG sensor from ON condition
)