Sigma SLX series, Operator'S Manual

Page: 7 / 13

Page 6 of 7 SLX Series
SPECIFICATIONS:
ANALOG VIDEO:
INPUTS: 161, 162 ............... 16, 75
Ω
terminated
321, 322 ............... 32, 75
Ω
terminated
161(L), 162(L)....... 16, high impedance looping
321(L), 322(L)....... 32, high impedance looping
INPUT RETURN LOSS ....................... 35 dB minimum at 10 MHz
INPUT LEVEL ..................................... 1.4 V p-p maximum
OUTPUTS: 161, ...................... 1, Dual, Source term., 75
Ω
162 ....................... 2, Dual, Source term., 75
Ω
321 ....................... 1, Source terminated, 75
Ω
322 ....................... 2, Source terminated, 75
Ω
OUTPUT LEVEL: ................................. 1.4 V p-p maximum
FREQUENCY RESPONSE: 161, 321
±
0.1 dB, 100 kHz to 25 MHz
±
0.5 dB, 100 kHz to 100 MHz
162, 322
±
0.1 dB, 100 kHz to 10 MHz
±
0.75 dB, 100 kHz to 100 MHz
BANDWIDTH: 161 ....................... 150 MHz minimum @ -3 dB
162, 321, 322 .….. 125 MHz minimum @ -3 dB
GAIN: ................................................... Set for Unity,
±
1 dB
HUM and NOISE: ................................. 70 dB RMS min.
below
1 V p-p
DIFFERENTIAL PHASE:....................... 0.1
°
max., 10% to 90% APL
DIFFERENTIAL GAIN: ......................... 0.1% max., 10% to 90% APL
CROSSTALK: ...................................... 60 dB minimum to 10 MHz
CONNECTORS: .................................. BNC
DIGITAL VIDEO:
INPUT: ................................................ SMPTE 259M-A,B,C,D, 800mV p-p maximum, 75
Ω
terminated
DATA RATE: ....................................... 143, 177, 270, 360 Mbps
OUTPUT SIGNAL: ............................... 800 mV p-p maximum,
±
10%
OUTPUT-to-OUTPUT ISOLATION.….. 20 dB minimum, 5 MHz to 270 MHz
OVERSHOOT: ..................................... 10% of total amplitude, maximum
INPUT CABLE LENGTH: ..................... up to 1000 feet (300M) Belden 8281 or equivalent
CONNECTORS: .................................. BNC
ANALOG AUDIO:
INPUTS: 161, 162 .......................... 16, Balanced, Bridging
321, 322 .......................... 32, Balanced, Bridging
INPUT LEVEL: ........................................ +24 dBm max., 600
Ω
INPUT IMPEDANCE: .............................. 50 K
Ω
, Balanced, 1-16
600
Ω
, Balanced, secondary
OUTPUTS: 161, 321 .......................... 1, Balanced
162, 322 .......................... 2, Balanced
OUTPUT LEVEL: ................................... +21 dBm max., 600
Ω
OUTPUT IMPEDANCE: .......................... 200
Ω
, Balanced
OUTPUT PROTECTION:........................ Indefinite short-circuit
FREQUENCY RESPONSE: All systems.
±
0.1 dB, 20 Hz to 20 kHz
@ +10 dBm, 1 kHz ref.
BANDWIDTH: ......................................... 150 kHz min. @ -3 dB
DISTORTION: ........................................ 0.1% max. @ +10 dBm
0.15% max. @ +21 dBm
GAIN: ...................................................... Set for Unity,
±
3 dB
HUM and NOISE: ................................... -80 dBm max., 20 kHz BW
GAIN VARIATION: .......... .......................
±
0.1 dB, any input to output
COMMON MODE REJECTION: ............. 70 dB min., 20 Hz to 2 kHz
60 dB min., 2 kHz to 20 kHz
CROSSTALK: ........................................ 85 dB min., worst case,
20 Hz to 20 kHz