background image

SL-50  SL-60 MIXERS 

8 of 23

 
STORAGE: 
 
Storage of packed mixer: 
The mixer must be stored in a closed and covered place, on a smooth and solid surface protected from dust 
and filth, sheltered from atmospheric agents and hygienically safe.   
The temperatures must remain between –20 and +50°C, and humidity no greater than 90%. 
 
 
Storage of unpacked mixer. 
If the mixer has already been unpacked, in addition to that above, it must be lifted from the ground with a 
pallet or other and covered in order to protect it from humidity, dust and filth. If wrapped in cellophane or 
another type of plastic, avoid airtight closing below the mixer in order to prevent corrosion linked to 
condensate.  

   

ATTENTION! 

The mixer must not be stored in the open!!  

 
  
 
INSTALLATION 

The mixer must stand in a vertical position, on a smooth surface sufficiently sturdy for the load (floor 
with resistance over 20 km/cm

2

). If in danger of tipping over (assembly on ship or other), anchor the 

mixer to the floor using 4 plugs or bolts with a traction resistance over kg 400 (M10) using the 

appropriate anchoring devices supplied upon request. 
 
 

 ATTENTION. 

Do not make the mixer function only on wheels, 

always tighten the two supports “A” until the wheels are fully 

lifted. 
 
 
 

Connection to electrical mains 
The electrical connection must be carried out by a specialised electrician, according to the modalities 
and standards in force in the country where it is installed. Make sure that the voltage and frequency 
of the system are the same as those on the mixer identification plate. Incorrect connection makes 
the warranty void.  

 
PRESERVATION OF THE MACHINE  
Storage before a long period out of service 
Clean the mixer thoroughly. 
Disconnect it from the electrical mains. 
If possible, put it back into its original packing. 
 
 
 
WARRANTY TERMS 
Validity:  The warranty starts from the delivery date and lasts 12 months, if: 
  

ƒ

  The mixer was not damaged during transportation, and it was installed, commissioned, used and 

serviced as prescribed in this manual. 

ƒ

 

It was not tampered with, modified and no unintended tools were installed on it.  

ƒ

  It did not undergo modifications or repairs carried out by the customer or third parties in an 

incompliant fashion or without the prior consent of the supplier. 

The following conditions constitute improper use of the mixer: 

 

Loading more than what is allowed or use of unsuitable ingredients. 

 

Cleaning with unsuitable tools or instruments that can scratch the bowl or damage the mixer or paint. 

 

Use of the mixer in unsuitable places. 

 

Summary of Contents for Silver 50
























Reviews: