Chapter 5
LabView Demo
5-1
5.0 Introduction
The LabView demonstration program VI is located on the Utilities CDROM in the folder
\SQM242 Card\LabView Source
. LabView 6 or higher is required.
Note
: Before using the LabView demo, it’s best to familiarize yourself with operation of
the SQM-242 CoDep program.
To run the demo, click “Load DLL”, “Use Card”, and then set the Sensor and Output
parameters as desired. Click “Start Readings” to display readings.
Be sure to click “Unload DLL” before stopping the LabView program. Otherwise a
Windows error will occur, and LabView may shut down.
