page 11
synchronizing the transmitters
Attaching the RoX 10.0 gps and initial use
www.sigmasport.com
ROX 10.0
ROX 10.0
2.5 Synchronizing the transmitters
To synchronize the transmitters, the RoX 10.0 gps must be switched on and in
training mode.
once synchronization is complete, the respective values appear on the
RoX 10.0 gps”s top display segment in “bikecomputer” view mode.
2.5.1 Synchronizing the speed
There are two options for synchronizing the speed:
−
start cycling – the receiver usually synchronizes with the transmitter after
five wheel rotations.
−
spin the wheel until the current speed appears on the display.
2.5.2 Synchronizing the cadence
There are two options for synchronizing the cadence:
−
start cycling – the receiver usually synchronizes with the transmitter after
five pedal rotations.
−
Turn the pedals until the current cadence appears on the display.
2.5.3 Synchronizing the chest belt
slightly moisten the electrodes and put on the chest belt. move into the vicinity of
the RoX 10.0 gps or get onto your bike. The RoX 10.0 gps usually synchronizes
with the chest belt in less than 10 seconds.
The current heart rate then appears on the display.
Summary of Contents for ROX 10.0 G
Page 4: ... ...
