Sigma ROX 10.0 G Page 17 User Manual Download

Page: 17 / 60

page 15

operating concept for the remaining menu

operating concept

www.sigmasport.com

ROX 10.0

4.3 Operating concept for the remaining menu

All settings are done following the same procedure:

−

press the

and

buttons to select the desired menu.

−

open this menu by pressing

ENTER

−

Navigate to the respective unit using

and

and press

ENTER

to edit it.

−

The value to be edited has a black background and can be modified by
pressing the

and

buttons.

−

save your changes by pressing

ENTER

4.3.1 Top display segment

The top line of the upper display segment will change depending on which menu
you are in. The possible functions of the

BACK

and

ENTER

buttons will be displayed

to assist you.

The second line of the top display segment always shows which menu/submenu
you are currently in.

4.3.2 Bottom display segment

The submenus and programmable values are displayed in the bottom display
segment.

press the

and

buttons to select the desired menu/submenu.

press

ENTER

to open the menu/submenu.

Enter

Summary of Contents for ROX 10.0 G





























































Search results

Summary of Contents for ROX 10.0 G

Reviews:

Related manuals for ROX 10.0 G

Brands by name

Popular brands

Sigma ROX 10.0 G, User Manual

Search results

Summary of Contents for ROX 10.0 G

Reviews:

Related manuals for ROX 10.0 G

Brands by name

Popular brands