11
Use the
↑
↓
keys to change the amount of filtering applied to the input signal. ‘O’ is no filter and ‘10’ is
high filter.
Once the selection is made select ‘NEXT’ and press ‘ENTER’ to return to ‘Menu 1’.
The scaling process is now complete.
ANALOG OUTPUT PROGRAMMING
From Menu 1 select ‘AOUT’ by highlighting with the cursor as previously described. Once selected
press ‘ENTER’ to access the analog output configuration screen.
Using the buttons as described previously, select and adjust the values required for the analog output.
Both the output value and the display value for that output can be selected. When complete, select
‘NEXT’ and press ‘ENTER’.
This will bring up the scaling window for analog output Point 2, which is set as before. When complete,
scroll to ‘DONE’ and press ‘ENTER’ to return to Menu 1.
NOTE: The internal HORN will sound when the output setpoint is reached. To prevent the horn
from sounding, highlight the ‘Y’ symbol adjacent to the horn symbol and use the Up/Down buttons
to change the value to ‘N’ (NO). This will prevent the horn from sounding when the setpoint is
reached.
Once all values are selected, scroll to ’NEXT’ press ‘ENTER’ to move to the #2 setpoint screen and
proceed as described above.
