Rev NS001b004 Windows Media Player and DirectShow Support
page 39
Manual Color Calibration
If Auto Calibration displays an error message, manually calibrate color:
1.
Navigate to Advanced>Manual Calibration from the
REALmagic® Configuration… dialog (Figure 4, page 16).
2.
Drag the “R” slider in the Dialog (Figur e26) up or down to the
point where the image of the large box on the right-hand side of the
window appears similar to the image of the GOOD box shown on
the left, but has the maximum noise.
3.
Make fine adjustments with the
Up
or
Down
arrow keys on the
keyboard.
4.
Click
Next
.
5.
Perform this procedure three more times for the each of the colors
red, green, and blue.Click
OK
after the last adjustment.
Figure 26. Dialog
Appendix A. Advanced
Configuration Options
