page 10
Hardware Installation Rev NS001b004
Figure 1. NetStream 2000TV
Preparations and Precautions
• Before opening the protective anti-static bag, touch the bag to one of
the metal expansion slot covers on the back of your computer to drain
residual static electricity from the package and from your body.
• Do not touch any exposed printed circuitry on the NetStream 2000TV
board.
• Prevent other people from touching the board. They might have a
static-electricity buildup.
• Limit your movement. Movement builds up static electricity.
Hardware Installation
1.
Turn off the power to the computer and to the VGA monitor.
Unplug (disconnect) the power cord from the computer.
2.
Disconnect the VGA monitor cable from your PC.
3.
Remove the cover from the computer. (Refer to your PC user's
manual for specific instructions.)
4.
Locate an available PCI expansion slot. (NetStream 2000TV is not
ISA compatible.)
Chapter 2: Hardware Installation
Note 2.
Static electricity can damage your equipment!! Do not remove the
board from its protective anti-static bag until you are ready to install it.
