Rev NS001b004 Hardware Installation
page 11
5.
Remove and set aside the slot cover screw and slot cover, if
applicable.
6.
Open the protective sleeve containing NetStream 2000TV, grasp
the circuit board by the edge of its mounting bracket, and remove it
from the protective sleeve.
7.
Insert NetStream 2000TV into the PCI expansion slot. Press down
gently on the top edges of the board to ensure that all connecting
points are seated securely. Anchor the board's mounting bracket
using the screw removed in Step 5.
8.
Replace the cover of your PC and reconnect the power cord.
Hardware Connections
Audio Connections
Dolby Digital Surround Sound
Connect your AV amplifier/decoder and speaker system to
the Digital Out (S/PDIF port) on NetStream 2000TV. To
use this connection method, your AV amplifier/decoder
must have an S/PDIF input.
Dolby Pro Logic Surround Sound/Stereo Line Output
Connect your Pro Logic Surround Sound amplifier/receiver
to the Line Out port on the NetStream 2000TV using a
standard audio mini-jack split to L/R audio RCA
connectors for Dolby Pro Logic Surround Sound output.
For standard analog stereo, connect speakers directly to
the Line Out port.
NetStream 2000TV has a standard 1/8-inch (3.5mm) stereo output port
as well as an S/PDIF connector. The stereo output port delivers a
standard analog stereo signal usable by virtually any stereo amplifier/
receiver or amplified speakers. This signal also contains Pro Logic
Surround Sound encoding, enabling surround sound when using a Pro
Logic receiver. You can use a single set of speakers to listen to both
MPEG-2 audio as well as other types of audio from the NetStream
2000TV. Use either the Windows mixer program or your AV receiver for
volume control.
Note 3.
If you install a DVD-ROM drive at the same time as the NetStream
2000TV, remember to attach the CD-Audio cable from the DVD-ROM drive
to your sound card. Otherwise, CD-Audio titles will not be audible when
played in the DVD-ROM drive. DVD-ROM audio will be audible whether or
not the CD-Audio cable is attached.
Note 4.
NetStream 2000TV requires a bus-mastered PCI slot. Most PCI slots
support PCI bus mastering, but if you experience difficulties with your
NetStream 2000 TV, try installing the card in a different PCI slot.
DIGITAL OUT
LINE OUT
