Rev NS001b004 Software Installation
page 17
3.
If the auto calibration function fails, reboot your system and try
again. If it fails again, perform a manual color calibration. See
Appendix A. Advanced Configuration Options‚ page 39.
4.
If further fine border adjustments are required, click
Adjust
border…
5.
Click the directional arrow in the
Border Adjust
dialog (Figure 5)
or use the arrow keys on your keyboard to align the four corners of
the colored window within the gray outlined pink window. Click
or press the plus (
+
) key on the keyboard to widen the colored
window. Click
or press the minus (
-
) key on the keyboard to
make the colored window narrower. Click
OK
to accept any
changes.
Figure 5. Border Adjust
6.
The
Reset Defaults
button sets the color calibration and the border
adjustment values to factory default settings.
Note 12.
If the auto calibration function continues to fail, right-click on the
Desktop and use the
Display Control Panel
to make sure that the monitor
refresh rate is set to 72 Hz or lower.
