SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 72
Level Offset
The
default is “Off”. Click the slide switch to switch the level offset status.
⚫
On: The value can be set by the touch screen keyboard or front panel keypad. The
displayed value will be the actual measurement value plus the offset value. This
feature makes measurements easier when there are amplifiers or attenuators in the
signal chain.
⚫
Off: The display is consistent with the actual reading of the power sensor.
Averaging Mode
The default is “Auto”. Click the drop down box to switch the averaging mode.
⚫
Auto: Automatically configure the average number of times based on the current
parameters. Fixed noise parameter settings will be automatically hidden.
⚫
Manual: Manually set the average times in Averaging Count.
⚫
Fixed Noise: The power sensor will control the internal noise not to exceed the set
value of the fixed noise parameter. Fixed noise parameter settings will be displayed.
It can be set by the touch screen keyboard or the front panel keypad.
Note:
If the power sensor does
not have a “fixed noise” mode, this option will not be
displayed in the drop down box.
Logging
The default is “Off”. Click the slide switch to switch the logging status.
⚫
On: The signal source will record the measurement values of the power sensor and
save these values in a text file.
⚫
Off: The signal source will not record the measurement values.
