SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 64
Set ftp login password.
Press
UTILITY
->
Interface
->
Ftp password settings
to enter the ftp password setting
interface. Firstly input the current password, and then set the new password. At last input
the new password again in Confirm Password to make the setup effective. If the password
needs to
be reset to default (the default password is “siglent”), just click the
Reset to
default
button.
3. GPIB Setting
Set the GPIB address from 1 to 30. SSG5000A must use the SIGLENT USB-GPIB
interface (optional) connected to the USB Host port located on the rear panel.
Press
UTILITY
->
Interface
->
GPIB Address
, and then press number keys to input value,
finally press
ENTER
to make the setup effective.
Self Test
1. LCD Test
Press
UTILITY
->
Self Test ->LCD Test
to enter the screen detection.
SSG5000A cycles through the red, green and blue pixels of the display to verify whether
there are dot defects on the screen.
Press 7 to change the color and press 8 or click the screen to exit.
2. Key Test
Press
UTILITY
->
Self Test
->
Key Test
to enter the keyboard test interface. Press the
function keys at the front panel one by one and observe whether the corresponding key is
checked. If not, an error may have occurred in that key. To exit the test, press 8 three
times or click the screen.
