SSG5000A RF Signal Generator User Manua
l
13 SSG5000A User Manual
RF output frequency setting. When the sweep type is "frequency" or "frequency &
amplitude", the frequency scanning progress bar is displayed.
3. RF level
RF output level setting. When the sweep type is "amplitude" or "frequency & amplitude",
the level scanning progress bar is displayed.
4. Touch screen display area: Display the settings under each menu
⚫
LF: LF output state, LF waveform and LF sweep related parameters can be set.
⚫
ANALOG MOD: Analog Modulation state. Amplitude modulation, frequency
modulation, phase modulation, or pulse can be set.
⚫
RF: RF output state. Frequency and level can be set.
⚫
SWEEP: RF Sweep state and related parameters can be set.
⚫
UTILITY: System and file related parameters can be set.
⚫
Power Sensor: Power sensor state and power sensor related parameters can be set.
1.6 Touch operation
The RF signal source provides a 5 inch capacitive touch screen to support various gesture
operations. Including:
◆
Click on the screen parameters or menu to edit the parameters.
◆
Left or right slide switches menus.
◆
Up and down slides the display menu.
Note:
The scrollbar is on the right side of the menu. If there is no scrollbar, it means that
only the current page exists.
