SIGLENT SDM3065X, User Manual

Page: 74 / 108

SIG L ENT
62 SDM3055 Digital Multimeter
Diagram 2- 35 Key Test Interface
3. Test the LCD screen.
Select
【
LCD
】
to enter the screen test interface, the screen shows the
message:
” Press „Change‟ to change Press „Done‟ to exit“. Press 【
Change
】
to start the test and observe if the screen has severe color or other display
error. As the Diagram 2-36 shows.
Diagram 2- 36 LCD Test Interface
4. Test the beeper.
Press
【
Beeper
】
to test the beeper. Under regular circumstance, press
NOTE:

Before you operate, the shapes on the screen display blue color.

The corresponding area of tested buttons or knobs would display green
color.

Press
【
Done
】
to exit the test.
NOTE:

Press
【
Change
】
to change the color of the screen. There are three
colors: red, blue and green.

Press
【
Done
】
to exit the test.