SIGLENT SDG5000 series, User Manual

Page: 180 / 229

Programming Guide
39
< bsch >:= {CH1, CH2}
< frq_dev >:={ Default unit is
“Hz”, value range depends on the model}
< pha_dev >:={ Default unit is
“
°
”value range depends on the model }
<fcoup>,<acoup>,<pcoup>:={ON, OFF}
<frat>,<prat>,< arat >:={a ratio value. value range depends on the model }
<adev>:={ a deviation value. value range depends on the model }
QUERY SYNTAX
EXAMPLE
COUP (COUPling)?
Set SDG5000 coupling state on
COUP STATE,ON
Set SDG5000 frequency deviation value 5Hz
COUP FDEV,5
Set SDG2000x amplitude coupling ratio
COUP ARAT,2
Query SDG2000X coupling information.
COUP?
Return:
COUP\sTRACE,OFF,FCOUP,ON,PCOUP,ON,ACOUP,ON,FDEV,5HZ,
PRAT,1,ARAT,2\n
Note:
Parameter/command SDG800 SDG1000 SDG2000X SDG5000 SDG1000X
TRACE no no yes no yes
STATE yes yes no yes no
BSCH yes yes no yes no
FCOUP no no yes no yes
FRAT no no yes no yes
PCOUP no no yes no yes
PRAT no no yes no yes
ACOUP no no yes no yes
ARAT no no yes no yes
ADEV no no yes no yes
3.20 Voltage Overload Command
DESCRIPTION
Sets or gets state of over-voltage protection.