SIGLENT SDG5000 series, User Manual

Page: 181 / 229

Programming Guide
40
COMMAND SYNTAX VOLTPRT<parameter>
<parameter>:= {ON, OFF}
QUERY SYNTAX VOLTPRT?
RESPONSE FORMAT VOLTPRT<parameter>
Note:
Parameter/command SDG800 SDG1000 SDG2000X SDG5000 SDG1000X
VOLTPRT no yes yes no yes
3.21 Store List Command
DESCRIPTION This command is used to read the stored wave data names if the
store unit is empty;
the command will return “EMPTY” string.
Note: M50~ M59 is user defined memory. The name will return
what you defined. if you do not define an arbitrary name, it will
return
“
EMPTY”(It is depends on the model).
QUERY SYNTAX
STL (StoreList)? BUILDIN, USER
EXAMPLE
Read all arbitrary data saved in the device.
STL?
Return:
STL M0, StairUp, M1, StairDn, M2, StairUD, M3, Trapezia, M4,
ExpFall, M5, ExpRise, M6, LogFall, M7, LogRise, M8, Sqrt, M9,
X^2, M10, Sinc, M11, Gaussian, M12, Dlorentz, M13, Haversine,
M14, Lorentz, M15, Gauspuls, M16, Gmonopuls, M17, Cardiac,
M18, Quake, M19, TwoTone, M20, SNR, M21, Hamming, M22,
Hanning, M23, Kaiser, M24, Blackman, M25, GaussiWin, M26,
Harris, M27, Bartlett, M28, Tan, M29, Cot, M30, Sec, M31, Csc,
M32, Asin, M33, Acos, M34, Atan, M35, ACot, M36, EMPTY,
M37 .
….
Read built-in wave data.
STL? BUILDIN
Return:
STL M0, Sine, M1, Noise, M10, ExpFal, M11, ExpRise, M12,
LogFall, M13, LogRise, M14, Sqrt, M15, Root3, M16, X^2,
M17, X^3, M18, Sinc, M19, Gussian, M2, StairUp, M20,
Dlorentz, M21, Haversine, M22, Lorentz, M23, Gauspuls,