SIGLENT TECHNOLOGIES SDG6000X Series, User Manual, Page: 59 / 198

SDG6000X User Manual 49
below the “Frequency/Period” menu label until Period is highlighted and then
enter the value.
To Set the BitRate/Period
Press Waveforms
→ Page 1/2 → PRBS → BitRate, to set the bit rate
parameter. When changing parameter, if the new value is valid, the value will
be set. Otherwise, the nearest valid value will be set. If Period (rather than
BitRate) is the desired parameter, press BitRate/Period again to enter the
period mode.
Figure 2-24 Setting the Bit Rate
To Set the Length
Press Waveforms
→ Page 1/2 → PRBS → Length, to set the length
parameter. The range of length is from 3 to 32. When changing parameter, if
the new value is valid, the value will be set;
otherwise
, the limited value will be
set.