SIGLENT TECHNOLOGIES SDG6000X Series, User Manual, Page: 31 / 198

SDG6000X User Manual 21
2.1 To Set the Standard Waveforms
The SDG6000X can output 8 standard waveforms; including sine, square,
ramp, pulse, noise, DC, arbitrary and PRBS. In this section, you will learn how
to set the parameters of each waveform.
2.1.1 To Set the Sine Waveform
Press Waveforms key to select the waveform function and then press the Sine
softkey. The sine waveform parameters are set by using the sine operation
menu, as shown in Figure 2-1. The parameters available for sine waveform
include frequency/period, amplitude/high level, offset/low level and phase.
Different sine signals can be generated by setting these parameters.
Figure 2-1 Sine Parameters Display Interface
Table 2-1 Menu Explanations of Sine Waveform
Note: To select the secondary menu item, press the key a second time. For
Function
Menu
Explanation
Frequency/
Period
Set the signal frequency or period
Amplitude/
HighLevel
Set the signal amplitude or high level
Offset/
LowLevel
Set the signal offset or low level
Phase Set the phase of the signal