SIGLENT TECHNOLOGIES SDG6000X Series, User Manual, Page: 137 / 198

SDG6000X User Manual 127
Press Utility
→
Output Setup
→
Wave Combine to enter the waveforms
combining interface, as shown in the following figure.
Figure 2-91 Waveforms Combining Interface
Table 2-41 Menu Explanations of Wave Combine
Function
Menu
Settings Explanation
CH1 Switch
CH1 Output the waveform of CH1
CH1+CH2 Output the waveform of CH1+CH2
CH2 Switch
CH2 Output the waveform of CH2
CH1+CH2 Output the waveform of CH1+CH2
Return Save the current operation and exit the current interface
Note:
When the waveforms combining function is enabled, the load of two channels
will be set to the same automatically. The settings are copied from the
currently selected channel.