SIGLENT TECHNOLOGIES SDG6000X Series, User Manual, Page: 165 / 198

SDG6000X User Manual 155
3.4 Example 4: Generating a Pulse Waveform
Generate a pulse waveform with 5 kHz frequency, 5 V high level, -1 V low level,
40
μs pulse width, 10 ns rising edge, 30 ns falling edge and 20 ns delay by
following these steps:

Set the Frequency.
1. Press Waveforms
→ Pulse → Frequency/Period and choose Frequency,
which will display in a blue color.
2.
Input „5‟ from the keyboard and choose the unit „kHz‟. The frequency is set
to 5 kHz.

Set the HighLevel.
1. Press Amplitude/HighLevel and choose the HighLevel which will display in
a blue color.
2.
Input „5‟ from the keyboard and choose the unit „V‟. The high level is set to
5 V.

Set the LowLevel.
1. Press Offset/LowLevel and choose the LowLevel which will display in a
blue color.
2.
Input „-1‟ from the keyboard and choose the unit „V‟. The low level is set to
-1 V.

Set the PulWidth.
1. Press PulWidth/DutyCycle and choose PulWidth which will display in a
blue color.
2.
Input „40‟ from the keyboard and choose the unit „μs‟. The pulse width is
set to 40
μs.

Set the Rise Edge.
1. Press Rise/Fall and choose Rise which will display in a blue color.
2.
Input „10‟ from the keyboard and choose the unit „ns‟. The rising edge is