Sievert 299001, Operator'S Manual

Page: 4 / 64

- 4 -
TECHNICAL SPECIFICATIONS
PRODUCT DESCRIPTION
General information for electric supply
The TW 5000 is delivered with power cord: 3 x 2.5 mm²,
earth (ground) is green/yellow; the two other wires are
neutral and phase 1 at single phase connection and
phase 1 and phase 2 at two phase connection.
▪ Use direct supply from main electric distributor or
use a generator.
▪ Use cables with 3 wires. Please note that the earth
(ground) wire is green and yellow.
▪ Recommended diameter of wires minimum 2,5 mm²,
maximum cable length 55 metres. If 1,5 mm² wires
are used, maximum cable length 35 metres.
▪ Use only extension cords with sufficient wire
diameter in accordance with information above.
▪ Your country’s specifications of electric tools and
installations should be respected.
POWER SUPPLY AND EXTENSION CORDS
Selecting the right generator
To make sure you choose the right generator,
go through these steps:
▪ Identify the items you want to run.
▪ Calculate the total surge watts required for all items.
▪ Select a generator that exceeds your total surge watts.
The multiplying factor between rated and surged
watts for TW 5000 and TH 1650 is approx. 1.2. For
instance if you run one TW 5000 (220 V) and one TH
1650 (120 V) your total surge watts will be 8040 W
((5000+1700)*1.2). Thus in this case we recommend
selecting minimum a 10,000 W generator with 50-
amp service.
Be sure to verify wattage requirements for starting
and running. Start one item at a time beginning with
the largest and ending with the smallest.
CAUTION! To provide continued protection against risk of electric shock, connect to properly
grounded outlets only.
CAUTION! To reduce the risk of electric shock, keep extension cord connection dry and off
the ground.
!
Type no. 299001 299047
Voltage 400 V ~ ± 10% 220 / 230 V ~ ± 10%
Cable Connection 400 V L1-L2 220 V L1-L2 / 230 V N-L1
Power Consumption 6300 W 5000 W
Frequency
50 Hz 60 Hz / 50 Hz
Temperature, fully adjustable 40°C – 650 °C / 100°F - 1200°F 40°C – 650 °C / 100°F - 1200°F
Drive, fully adjustable 0 – 7 m/min / 0 – 20 ft/min 0 – 7 m/min / 0 – 20 ft/min
Air flow, fully adjustable 0 - 48 l/s / 0 – 12.7 gal/s 0 - 48 l/s / 0 – 12.7 gal/s
Emission level 70 dB 70 dB
Nozzle 40 mm / 1.58” 40 mm / 1.58”
Width of welding seam 40 – 50 cm / 1.5” – 2” 40 – 50 cm / 1.5” - 2”
Dimensions 56x38x25 cm / 22”x15”x10” 56x38x25 cm / 22”x15”x10”
Weight (4 kg / 8.8 lb built-in weight) 30 kg / 68 lb 30 kg / 68 lb
Additional weight (included) 8 kg / 17.6 lb 8 kg / 17.6 lb
Additional weight (not included) 4 kg / 8.8 lb (art no 299301) 4 kg / 8.8 lb (art no 299301)
Power cord length 91 cm / 3 ft. 91 cm / 3 ft.
GB