- 6 -
DISPLAY UNIT
OPERATION
PUT THE MACHINE IN CORRECT POSITION
▪
The machine is equipped with
separate transportation wheels for
easy transport.
▪
Tip the machine as shown on
picture and easily move it to your
desired location.
▪
Align the machine to its correct
position with the overlap edge of the
membrane.
▪
Turn the power on at the main
switch below the control panel. Wait
until you see text on the display.
▪
Adjust the temperature with the red
knob to desirable temperature.
3
▪
Select between °C/meter and °F/feet
by pushing the button. The machine
will remember last used setting.
2
1
▪
Adjust the fan speed with the blue
knob to desirable speed.
5
▪
Push the fan button to start heating
up the machine. The red wait indicator
will light up.
6
It will take a few minutes for the machine to heat up to its programmed temperature. Wait until the red
indicator light is switched off and the green ready indicator light comes on. Now the machine is ready
to start welding.
7
▪
The adjustable guide wheel and the
welding belt should be in line with the
edge of the overlapped membrane
according to the picture.
1
2
3
▪
Adjust the machine speed with the
grey knob to desirable speed.
4
GB
Summary of Contents for 299001
Page 62: ... 62 NOTES ...
Page 63: ... 63 NOTES ...