Sievert 299001, Operator'S Manual

Page: 10 / 64

- 10 -
TROUBLESHOOTING GUIDE
PROBLEM CAUSE CORRECTION
Will not start 1. No Power 1. Check the electric supply or the
fuses
The desired temperature is not
reached
1. The temperature is set to 0˚C/0˚F
2. Wrong heating element is used
3. Tube for heating element missing
4. Defective heating element
1. Set correct temperature
2. Change heating element
3. Replace tube
4. Insert a new heating element
The machine is not mowing 1. Defective cog belt
2. Defective drive engine
1. Replace cog belt
2. Contact service centre
The machine is not functioning.
Fan running, text on display:
“TEMPSENSOR FAILURE”
1. The temperature sensor is not
plugged in properly
2. Faulty temperature sensor
1. Plug in temperature sensor
correctly
2. Replace temperature sensor
The machine is not functioning.
Text on display:
“INPUT VOLTAGE < 180V”
1. Too low incoming voltage 1. Check power supply
The machine is not functioning.
Text on display:
“INPUT VOLTAGE > 450V”
1. Too high incoming voltage 1. Check power supply
The machine is not functioning.
Fan running, text on display:
“HIGH AMBIENT TEMPERATURE”
1. Fan unit overheated 1. Make sure that the air intake is
clean and not clogged
SERVICE AND REPAIR
All service and repair should be done only by an authorized Sievert Service Centre.
For a service centre near you, please see contact information on the backside or at www.sievert.se
GB