AirLink LX40 Series Hardware User Guide
Rev. 2 January 2021
34
41112510
•
Continuous status monitoring of important health data such as signal strength
•
Location monitoring, including world map views
•
Complete ALEOS reporting and configuration, including historical views of ALEOS
information
•
Configure individual routers or use templates to perform batch configurations of your
AirLink routers
•
Single-click over-the-air firmware updates to all your routers
•
Compatible with all carriers or mobile network operators
To get started, either call your AirLink reseller or visit:
Configuring with AMM
AirLink Mobility Manager (AMM) is a Network Management solution that enables simplified
management, control and monitoring of connected AirLink routers. AMM is a licensed,
unified software platform deployed in the enterprise data center. It enables:
•
Mobile network and asset management
•
Over-the-air registration, configuration and software updates
•
Consolidated network view of an entire fleet, in-field applications and mobile assets,
using a virtual dashboard to monitor, report, manage, and troubleshoot all mobile
resources as required.
If you require a network management solution deployed in your data center, contact your
Sierra Wireless sales representative for a demonstration of the AMM capabilities.
Configuring with AT Commands
For a complete list of AT commands, refer to the ALEOS Software Configuration User
Guide.
Reboot the LX40
To reboot the LX40, either:
•
On the router, use a tool such as a paper clip or small screwdriver to press the Reset
button for less than 5 seconds. (Release the button when the Power LED flashes
green.) The reset button is recessed approximately 5 mm (1/4 inch), which prevents
casual use of a pen for resetting the router. The Reset button is small, so ensure that
the tool fully contacts the button.
•
In ACEmanager, click the Reboot button on the toolbar.
Reset the LX40 to Factory Default Settings
To reset the router to the factory default settings:
•
In ACEmanager, go to Admin > Advanced and click the Reset to Factory Default
button.
