16
OPERATING THE UNIT
Plug the fireplace in and turn the power switch to “I “to turn the power on. The “I” indicates ON and “O”
indicates OFF. When the unit is turned on, there will be chiming sound.
NOTE: The power switch is located at the bottom left hand side of the unit.
When using remote control, always point it at the middle of the fireplace, and keep not far away than 6
metres.
This remote control will be used on:
WM-FML-40, WM-FML-48, WM-FML-62, WM-FML-85
The button located at the top position of the remote control is ON/OFF. Press it, the flame and
ember will be on. The heater will be off. Press again, the fireplace will turn off.
“
DISPLAY ON/OFF
”: Switching the fireplace flame and tray light ON/OFF. It has functions of setting
memory.
“
FLAME ORANGE
”: Adjust the orange colour brightness of flame.
“
FLAME YELLOW
”: Adjust the yellow colour brightness of flame.
“
TRAY ORANGE
”: Adjust the orange colour brightness of tray.
TRAY WHITE
”: Adjust the white colour brightness of tray.
“
MOOD LIGHT ON/OFF
”: Switching the fireplace mood light ON/OFF.
“
ADJUST
”: Switching the color of mood light. There are 16
different colors.
“
FLASH
”: Switching flash kind of mood light. There are 4 different
flash styles.
“
HEATER ON/OFF
”: Switching the fireplace heater ON/OFF. It
has functions of setting memory.
“
HIGH
”: The heater works at 1500W.
“
LOW
”: The heater works at 750W.
“
TEMP.
”: The heater keep working if the room temperature lower
than 22
℃
. The heater not working if the room temperature
higher than 25
℃
.
“
Summary of Contents for WM-FML-40
Page 23: ...Exploded View 23...
