15
OPERATING THE UNIT
1. Make sure the appliance is switched OFF
(refer to page 19 for instruction)
2. Attach the provided adaptor to the power port
on the right hand side of the unit.
3. Plug unit into electrical outlet.
HARD-WIRE INSTALLATION
If it is necessary to hard wire this appliance, a
qualified electrician may remove the cord
connection, and wire the appliance directly to
the house hold wiring.
1. Unscrew two screw show in the below.
Remove the cover plate and the power cord fix
piece, remove power cord. Remove the
knockout.
2. Attach the wiring to the junction block
3. Put the plate back and screw back.
WARNING:
Do not attempt to wire your own new outlets
or circuits. To reduce the risk of injury,
electric shock or fire, use a licensed
electrician.
Appliance has overheated and safety device
has cause the thermal switch to discount.
Unplug the appliance, allow appliance to cool
for 15 minutes, then plug back in.
Inspect for an objects on or adjacent to the
heater that may have locked the airflow or
otherwise caused high temperatures to have
occurred.
Power adaptor port
Wall
Summary of Contents for WM-FML-40
Page 23: ...Exploded View 23...
