Appliance settings
en
23
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the appliance.
Do not allow these agents to come into
contact with the surfaces of the
appliance. If necessary, immediately
wipe away spray residue and other
residues/droplets with a damp cloth.
Notes
■
When dosing all detergents,
cleaning aids and cleaning agents,
always follow the manufacturer's
instructions.
■
If dosing detergent manually, do not
add additional detergent to the
intelligent dosage dispenser (set
intelligent dosage to "off"). This will
prevent overdosing and foaming.
■
Dilute viscous fabric softener and
fabric conditioner with water to
prevent blockages.
Dosing and adding detergent:
1.
Pull out the detergent drawer.
2.
Add the correct dosage to left-hand
compartment depending on:
– Soiling
– Water hardness (ask your water
supply company)
– The amount of laundry
– The manufacturer's instructions
3.
Close the detergent drawer.
Q
Appliance settings
Appliance settings
Automatic switch-off
If the appliance is not operated for a
prolonged period (approx. 15 minutes),
it may automatically switch off before
the programme starts and when the
programme has ended. Press the
power button
#
again to switch on the
appliance.
Basic settings
To access the basic settings, touch and
hold the
ç
Silent wash
button for
approx. 3 seconds. The control panel
show:
You can change the following basic
settings:
■
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the drum care information
signal on/off.
End signal
Touch and hold the
ç
button for
approx. 3 seconds.The indicator lamp in
position
1
is on. You can use the
+
button to adjust the volume of the end
signal, e.g.
‘
-
‚
.
#
#
www.devicemanuals.eu/
