ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
7c
7
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
7c
7
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
ɛ
8
8c
â
â
3
â
â
ÿ
/ :
ÿ
/
7
8
ü
:
3
7c
ʑ
ʑ
â
â
ʑ
a
7
â
a
þ
c
c
7c
c
#
a
a
a
a
7
a
a
a
10
ʑ
Additional functions
See also
Programme overview
a
Page
7
Select the desired additional functions with the
Option
button and then activate (or deactivate)
the chosen function with the
Select
button, e.g. select the
Intensive
function:
– For
Cottons Eco
3
programme, touch
Option
button,
S
Less Iron
indicator flashes.
– Touch
Option
button again until
Intensive
indicator flashes.
– Touch
Select
button.
Intensive
indicator flashes and related
indicator comes on. It means
the function has been preselected. If you need to deselect the function immediately, touch the
Select
button again.
– If no other action, the
Intensive
indicator stops flashing and comes on after several seconds.
Additional function is selected successfully. Setting of
Rinse Plus
.
a
Page 10
ý
Quick
Shorten the washing time. For slightly soiled items.
S
Less Iron
Special spin sequence with subsequent fluffing. Gentle final
spin – residual moisture in the laundry increased slightly.
?
Water Plus
High water level to achieve better rinse result.
Rinse Plus
Additional rinse cycles, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Select
Rinse Plus
by
Option
button. Then touch
Select
to
â
activate the function and touch
Select
button for desired
rinse cycles (max. 3 cycles).
Intensive
Extends the washing time for a more intensive washing
of
â
heavily soiled items.
Prewash
For heavily soiled laundry.
Prewash
at max. 30
â
°C.
ʑ
Start/Reload
For starting or pausing the washing/drying programme.
ʑ
Signal volume
(for button signal and information signal)
ʑ
Childproof lock
#
Programme will not be changed by accidental operation.
To activate the childproof lock:
– After the programme starts or finish in time is activated
a
Page 9
, press and hold the
Delay
button for 5 seconds;
– Release when the
#
symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the
Start/Reload
indicator remains on to remind you to deactivate
the childproof lock.
To deactivate the childproof lock:
– Touch the
Delay
button until the
#
symbol turns off.
– Release the button.
#
symbol flashes if the programme has been changed while childproof lock is activated.
If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the running programme will be halted.
Set to
for
at least
5 seconds
1 step
clockwise
Touch
Temp
.
button and
hold
1 step
clockwise
Button signals
Information signals
Touch
Delay
button and
set volume
*
1 step
clockwise
Set to
direct
*
If required, set repeatedly.
1. Activate setting
mode for signal
volume
2. Set volume for ...
Release
the
Temp
.
button.
+
Touch
Delay
button and
set volume
*
Additional functions and Individual settings
11
Please close the door immediately because of rising water level.
In pause status
and
are displayed alternately.
Door is locked due to safety reasons (water level and/or temperature are too high).
For
washing programme
: In pause status,
and
are displayed alternately.
If you need to open the door, wait for the temperature to drop or drain the water (e.g.
select
Spin
or
Empty
C
programme).
For
drying programme
: If you need to open the door, wait for the temperature to drop
or set 15 minutes time dry programme to cool down the laundry.
If
comes up after the drying programme ends frequently:
– Clean the cool air inlet filter.
a
Installation and maintenance instructions, Page 9
– Run the
Fluff Clean
ü
:
(cold) programme without laundry.
Door cannot be locked/unlocked due to high temperature of the door lock. Keep the
machine switched on for about 1 minute. Then the machine can be
â
locked/unlocked
again.
Door cannot be opened due to the high temperature after the drying programme.
The cooling down process will continue until this display disappears and the door can
be opened.
Flashing
(no water supply):
Tap turned on?
Inlet filter blocked?
Clean filter
a
Installation
and maintenance instructions, Page 8
Supply hose kinked or blocked?
On
(low water pressure):
Only information. No influence on the
programme process. The programme
duration will be prolonged.
Clean drain pump
a
Installation and maintenance instructions, Page 8;
outlet pipe/drainage hose blocked.
Hold the
7
Dry
button for 3 seconds to clear this display.
– Clean the cool air inlet filter.
a
Installation and maintenance instructions, Page 9
– Run the
Fluff Clean
ü
:
(cold) programme without laundry.
other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.
Safety instructions
– Read and follow the operating and Installation and maintenance instructions and all other information
enclosed with the washer dryer.
– Retain documents for subsequent use.
Risk of electric shock
– Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp hands.
Risk of death
For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washer dryer door. This will prevent children from
locking themselves in and risking their lives.
Risk of suffocation
– Keep packaging, plastic film and packaging parts out of the reach
of
â
children.
Risk of poisioning
– Keep detergents and care products out of the reach of children.
Risk of explosion
– Items of laundry pretreated with cleaning agents containing solvents, e.g.
stain remover/cleaning solvents may lead to an explosion after being loaded
into the washer dryer.
First rinse items of laundry thoroughly by hand.
Risk of injury
– Washer dryer door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washer dryer.
– Do not lean on the open washer dryer door.
– Do not touch the drum in case it is still spinning.
– Ensure that the pump cap is screwed on while the machine is running to
prevent the escape of water and contact with moving pump parts.
– If a drying programme was interrupted, the washer dryer and the laundry
may be very hot, select
Intensive Dry
7c
or
Low Heat Dry
8
and set 15
minutes programme to cool down the laundry, then remove the laundry.
Information on the display
ʑ
ʑ
a
ʑ
a
a
a
ʑ
ʑ
a
ʑ
ʑ
a
a
ʑ
ʑ
~
a
ʑ
:
ʑ
ʑ
a
a
ʑ
â
ʑ
ʑ
ʑ
ʑ
:
ʑ
â
ʑ
â
a
:
â
ʑ
a
7
a
ʑ
â
â
â
a
ʑ
ʑ
a
