SECTION 12
Halo Operation
State mame
Description
Halo status indicator
Power Available
240V or 208V Power Present
Off
Ready to Charge
EV detected, waiting for charging command from EV
Green - Solid
Charging
Charging EV
Green - Fading in and out
Pause
Operation paused
Off
Delay Timer
Operation awaiting delay timer
Off
Remote
System is controlled via remote control interface
Depends on charging or fault state
SECTION 13
Decommissioning VersiCharge
Decommissioning of a charger is recommended when there is transfer of ownership (sale) or replacement
of new Wi-Fi module. However, it may be necessary to decommission the VersiCharge during
troubleshooting. This may be necessary in order to allow the charger to connect to the VersiCharge Cloud
from a different Wi-Fi network. Disconnect/decommission the charger from the VersiCharge SG Cloud
Portal:
• Navigate to the cloud portal.
• Go to the Settings > EV Chargers web page. Note the name of the charger you want to decommission
and the “X” to the right of the charger’s name.
• Click on the X at the end of the line (to the right) displaying the charger name.
• Select Okay in the dialogue popup. The charger is now disconnected and may be connected to a new
Wi-Fi
network.
NOTE:
if the VersiCharge is not seen by the cloud, it is not communicating with the cloud and
cannot be decommissioned.
41
Commissioning and Troubleshooting Guide
VersiCharge™ SG
