68
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006
Sc
hablone 2
005_0
7_2
7
Port Forwarding
If you configure Port Forwarding, the Gigaset SX763 WLAN dsl outwardly assumes the
role of the server. It receives requests from remote users under its public IP address and
automatically redirects them to local PCs. The private IP addresses of the servers on the
local network remain protected.
Internet services are addressed via defined port numbers. The Gigaset SX763 WLAN dsl
needs a mapping table of the port numbers to redirect the service requests to the serv-
ers that actually provide the service.
Port Forwarding has been configured for this purpose.
ì
To set up port forwarding for a service, select
Port Forwarding
from the
Advanced
Settings
–
Internet
–
Address Translation (NAT)
menu.
ì
Select the required application from the
Predefined applications
list.
ì
Activate
Enabled
by ticking the check box.
ì
Click the
Add
button. The data for the required service is entered on the screen.
ì
Click the
Delete
button to delete an entry.
If the application you require is not in the list, you must manually enter the relevant data
on the screen:
ì
Select the protocol for the service you are providing from the
Protocol
list.
ì
Under
Public port
, enter the port number of the service you are providing.
ì
In the
Local port
field, enter the internal port number to which service requests are
to be forwarded.
