Siemens SX763 Manual Download Page 27

Page: 27 / 162

First steps

Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / device.fm / 20.07.2006

hablone 2

005_0

7_2

Phone 1/
Phone 2

The relevant port is configured. The receiver of the phone
connected to the port has been lifted for a call.

Flashing

The phone is ringing and a call is being received or a call is
being conducted.

Off

The receiver is down. No call or phone conversation at
present.

On (red)

The port is not configured, no connection is possible. The
receiver of the connected telephone is down.

Flashing
(red)

The port is not configured, no connection is possible. The
receiver of the connected telephone is lifted.

USB

On (green)

A device is connected to the Gigaset SX763 WLAN dsl via the
USB port.

Flashing
(green)

The connected device is active.

Flashing
quickly

The device connected on the USB port is using too much
power (see page 134).

Off

There is no device connected.

ADSL

The DSL line is connected and the DSL port is ready for use.

Flashing

The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).

Off

The DSL line is not connected.

LAN1 –
LAN4

A device is connected to the relevant LAN port.

Flashing

The relevant LAN port is sending or receiving data (traffic).

Off

There is no device connected.

WLAN

The radio interface is active.

Flashing

The Gigaset SX763 WLAN dsl is sending or receiving data on
the radio interface.

Off

The radio interface has been deactivated or no radio signal
is being received.

Line

One of the connected phones' receivers has been lifted for a
call (fixed network telephony).

Flashing

The phone is ringing and a fixed network call is being
received or someone is waiting on the line.

Off

There is currently no fixed network connection.

VoIP

At least one port is configured for VoIP and VoiP access is
registered with the provider.

Flashing

A call is currently being made via the Internet.

Off

There is currently no connection for Internet telephony.

Online

Connection to the Internet has been established.

Off

There is no Internet connection.

LED

State

Status

Summary of Contents for SX763



































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Siemens SX763, Manual

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands